Achieve real wood-like aesthetics with our EasyWood filament. Made with 40% wood particles, it's easy to print and perfect for creating objects with a wood-like feel, look, and smell. Available in 1.75mm and 2.85mm diameters and in 500 gram, 250-gram, and 2300-gram weights.

Our EasyWood filament is the perfect solution for achieving real wood-like aesthetics in your 3D-printed objects. Made with 40% wood particles, it's easy to print and perfect for creating objects with a wood-like feel, look, and smell. The filament is based on our EasyFil PLA compound and the 40% gravimetrical filling with grinded wood particles make the filament absolutely warp-free. EasyWood has great thermal stability and filament flowing behavior, making it perfect for first- and inter-layer adhesion. It can also be printed at high printing speeds. Unique features of this filament include the ability to create wood-nerve structures by postprocessing the printed object with a piece of fine grit sandpaper or by varying the print/extrusion temperature.

The filament is biodegradable and available in 1.75mm and 2.85mm diameters, and in 500-gram, 250-gram, and 2300-gram weights.

Unique features

Extremely high wood-filling of 40%
- Real wood feel, look, and smell
Very easy to print
- Warp-free printing and no deformation after cooling
- Great thermal stability and filament-flowing behavior
- Perfect first- and inter-layer adhesion
- Can be printed at high printing speeds
Create wood-nerve structures
- By postprocessing the printed object with a piece of fine grit sandpaper
- By varying the print/extrusion temperature
Biodegradable

Download Technical Data Sheet Here

General printing guidelines

Nozzle size: ≥ 0.4mm	Layer height: ≥ 0.2mm	Flow rate: ± 100%
Print temp: ± 210 - 230° C	Print speed: Low	Retraction: Yes ± 5mm
Heat bed: ± 0 - 60° C	Fan speed: 50-100%	Experience level: Beginner

Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends and printer offset so it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

ρ: 1.20 g/cc	50 gr coil	0.5 Kg spool	2.3 Kg spool
Ø 1.75mm	± 17.3m	± 173m	797m
Ø 2.85mm	± 6.5m	± 65m	300m

Nozzle cleaning

When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow-in-the-dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.

Product export information

HS Code: 39169090

Description: Monofilament

Country of origin: the Netherlands

Compliance

This filament is compliant with the below-listed directives and regulations.

RoHS directive 2011/65/EC
REACH directive 1907/2006/EC

This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only to the above-described products.